--- res: bibo_abstract: - " Adding three-dimensional printed objects on existing surfaces enables creation of multi-material objects with tailored mechanical properties. Especially, the tensile strength of a textile fabric is advantageous in comparison with three-dimensional printed polymeric parts, while the latter can increase the stiffness of the composite. The adhesion forces between both material partners, however, are crucial for the reliability of the multi-material object. While several printing and material properties have been shown to influence the adhesion previously, this article concentrates on the possible pretreatment methods for three-dimensional printing on a cotton fabric. In our experiments, we have shown that especially pretreatments which made the textile surface more hydrophobic or more hydrophilic resulted in significant modifications of the adhesion forces. In addition, the adhesion is influenced by the infill orientation, with an orientation of 90° being significantly advantageous compared to 0°. While surface roughness was also shown to depend on the infill angle, no significant differences of the tensile strength or the elongation at break were measured.\r\n @eng" bibo_authorlist: - foaf_Person: foaf_givenName: Tomasz foaf_name: Kozior, Tomasz foaf_surname: Kozior - foaf_Person: foaf_givenName: Christoph foaf_name: Döpke, Christoph foaf_surname: Döpke - foaf_Person: foaf_givenName: Nils foaf_name: Grimmelsmann, Nils foaf_surname: Grimmelsmann - foaf_Person: foaf_givenName: Irén foaf_name: Juhász Junger, Irén foaf_surname: Juhász Junger - foaf_Person: foaf_givenName: Andrea foaf_name: Ehrmann, Andrea foaf_surname: Ehrmann foaf_workInfoHomepage: http://www.librecat.org/personId=223776 orcid: 0000-0003-0695-3905 orcid_put_code_url: https://api.orcid.org/v2.0/0000-0003-0695-3905/work/94758884 bibo_doi: 10.1177/1687814018792316 bibo_issue: '8' bibo_volume: 10 dct_date: 2018^xs_gYear dct_isPartOf: - http://id.crossref.org/issn/1687-8140 - http://id.crossref.org/issn/1687-8140 dct_language: eng dct_publisher: SAGE Publications@ dct_title: Influence of fabric pretreatment on adhesion of three-dimensional printed material on textile substrates@ ...