Influence of washing on the adhesion between 3D-printed TPU and woven fabrics

J. Störmer, D. Görmer, A. Ehrmann, Communications in Development and Assembling of Textile Products 2 (2021) 34–39.

Artikel | Veröffentlicht | Englisch
Autor*in
Störmer, Jannik; Görmer, Daniel; Ehrmann, AndreaFH Bielefeld
Abstract
3D printing on textile fabrics can be used to create composites with position-dependent mechanical, water-resistant, magnetic or other properties. An important prerequisite to use such composites technologically or for design purposes is a sufficient adhesion between both materials. While previous studies revealed that soft, elastic printing polymers were advantageous to prepare connections with a high adhesion, not much research has been performed yet on the dependence of the adhesion on textile fabric structure, heat post-treatment, and the influence of washing, which is necessary for most applications of such composites. Here we investigate composites from thermoplastic polyurethane (TPU) 3D-printed on two different woven cotton fabrics. Besides the expected strong correlation of the adhesion with the distance between nozzle and printing bed, we find a higher adhesion on the thinner fabric and an increase in the adhesion after one washing cycle.
Erscheinungsjahr
Zeitschriftentitel
Communications in Development and Assembling of Textile Products
Band
2
Zeitschriftennummer
1
Seite
34-39
eISSN
FH-PUB-ID

Zitieren

Störmer, Jannik ; Görmer, Daniel ; Ehrmann, Andrea: Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. In: Communications in Development and Assembling of Textile Products Bd. 2, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden (2021), Nr. 1, S. 34–39
Störmer J, Görmer D, Ehrmann A. Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. Communications in Development and Assembling of Textile Products. 2021;2(1):34-39. doi:10.25367/cdatp.2021.2.p34-39
Störmer, J., Görmer, D., & Ehrmann, A. (2021). Influence of washing on the adhesion between 3D-printed TPU and woven fabrics. Communications in Development and Assembling of Textile Products, 2(1), 34–39. https://doi.org/10.25367/cdatp.2021.2.p34-39
@article{Störmer_Görmer_Ehrmann_2021, title={Influence of washing on the adhesion between 3D-printed TPU and woven fabrics}, volume={2}, DOI={10.25367/cdatp.2021.2.p34-39}, number={1}, journal={Communications in Development and Assembling of Textile Products}, publisher={Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden}, author={Störmer, Jannik and Görmer, Daniel and Ehrmann, Andrea}, year={2021}, pages={34–39} }
Störmer, Jannik, Daniel Görmer, and Andrea Ehrmann. “Influence of Washing on the Adhesion between 3D-Printed TPU and Woven Fabrics.” Communications in Development and Assembling of Textile Products 2, no. 1 (2021): 34–39. https://doi.org/10.25367/cdatp.2021.2.p34-39.
J. Störmer, D. Görmer, and A. Ehrmann, “Influence of washing on the adhesion between 3D-printed TPU and woven fabrics,” Communications in Development and Assembling of Textile Products, vol. 2, no. 1, pp. 34–39, 2021.
Störmer, Jannik, et al. “Influence of Washing on the Adhesion between 3D-Printed TPU and Woven Fabrics.” Communications in Development and Assembling of Textile Products, vol. 2, no. 1, Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden, 2021, pp. 34–39, doi:10.25367/cdatp.2021.2.p34-39.
Alle Dateien verfügbar unter der/den folgenden Lizenz(en):
Creative Commons Namensnennung - Nicht kommerziell - Keine Bearbeitungen 4.0 International (CC BY-NC-ND 4.0):

Link(s) zu Volltext(en)
Access Level
Restricted Closed Access

Export

Markierte Publikationen

Open Data LibreCat

Suchen in

Google Scholar