PUBLIKATIONSSERVER

Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment

A. Chalgham, A. Ehrmann, I. Wickenkamp, Polymers 13 (2021).

Artikel | Veröffentlicht | Englisch
Autor*in
Chalgham, Ali; Ehrmann, AndreaFH Bielefeld ; Wickenkamp, Inge
Abstract
Fused deposition modeling (FDM) is one of the most often-used technologies in additive manufacturing. Several materials are used with this technology, such as poly(lactic acid) (PLA), which is most commonly applied. The mechanical properties of 3D-printed parts depend on the process parameters. This is why, in this study, three-point bending tests were carried out to characterize the influence of build orientation, layer thickness, printing temperature and printing speed on the mechanical properties of PLA samples. Not only the process parameters may affect the mechanical properties, but heat after-treatment also has an influence on them. For this reason, additional samples were printed with optimal process parameters and characterized after pure heat treatment as well as after deformation at a temperature above the glass transition temperature, cooling with applied deformation, and subsequent recovery under heat treatment. These findings are planned to be used in a future study on finger orthoses that could either be printed according to shape or in a flat shape and afterwards heated and bent around the finger.
Erscheinungsjahr
Zeitschriftentitel
Polymers
Band
13
Zeitschriftennummer
8
Artikelnummer
1239
eISSN
FH-PUB-ID

Zitieren

Chalgham, Ali ; Ehrmann, Andrea ; Wickenkamp, Inge: Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment. In: Polymers Bd. 13, MDPI AG (2021), Nr. 8
Chalgham A, Ehrmann A, Wickenkamp I. Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment. Polymers. 2021;13(8). doi:10.3390/polym13081239
Chalgham, A., Ehrmann, A., & Wickenkamp, I. (2021). Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment. Polymers, 13(8). https://doi.org/10.3390/polym13081239
@article{Chalgham_Ehrmann_Wickenkamp_2021, title={Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment}, volume={13}, DOI={10.3390/polym13081239}, number={81239}, journal={Polymers}, publisher={MDPI AG}, author={Chalgham, Ali and Ehrmann, Andrea and Wickenkamp, Inge}, year={2021} }
Chalgham, Ali, Andrea Ehrmann, and Inge Wickenkamp. “Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment.” Polymers 13, no. 8 (2021). https://doi.org/10.3390/polym13081239.
A. Chalgham, A. Ehrmann, and I. Wickenkamp, “Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment,” Polymers, vol. 13, no. 8, 2021.
Chalgham, Ali, et al. “Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment.” Polymers, vol. 13, no. 8, 1239, MDPI AG, 2021, doi:10.3390/polym13081239.
Alle Dateien verfügbar unter der/den folgenden Lizenz(en):
Creative Commons Namensnennung 4.0 International Public License (CC-BY 4.0):

Link(s) zu Volltext(en)
Access Level
Restricted Closed Access

Export

Markierte Publikationen

Open Data LibreCat

Suchen in

Google Scholar